gnucap:user:mdump [*]

5.MDUMP

Purpose:Prints the dc tran matrix values.

Status:Implemented

Syntax:

   mdump
   mdump filename

Comments:

Command dumps the dc-tran matrix into the console,if the filename is specified then output is redirected to the file.Two matrices one before the lu decomposition and one after the lu decomposition is dumped.

Example:

   gnucap>mdump
   DC-Tran matrix before LU decomposition:
   0.    0.    0.    0.   
   0.    0.02776   -0.005802   -0.02186   
   0.   -0.02738    0.01161    0.01578   
   0.   -273.8u   -0.005802    0.006157   
   DC-Tran matrix after LU decomposition:
   0.    0.    0.    0.   
   0.    0.02776   -0.209   -0.7874   
   0.   -0.02738    0.00589   -0.9816   
   0.   -273.8u   -0.005859    190.1u  
   gnucap>
  
   gnucap>mdump matrix.txt
   gnucap>!cat matrix.txt
   DC-Tran matrix before LU decomposition:
   0.0000 	    0.0000 	  0.0000 	0.0000 	
   0.0000 	    0.0278 	 -0.0058       -0.0219 	
   0.0000 	   -0.0274 	  0.0116 	0.0158 	
   0.0000 	   -0.0003 	 -0.0058 	0.0062 	
   DC-Tran matrix after LU decomposition:
   0.0000 	    0.0000 	  0.0000 	0.0000 	
   0.0000 	    0.0278 	 -0.2090       -0.7874 	
   0.0000 	   -0.0274 	  0.0059       -0.9816 	
   0.0000 	   -0.0003 	 -0.0059 	0.0002   
   gnucap>